Cali
Picture of the Dannysound Cali (California) oscillator module. It has a 12 HP anodized grey metal panel with blue print. It features 1 large skirted black knob for frequency at the top with an LED pushbutton switch to lower left and 3 small un-skirted black knobs for wave-shape, wave-shape CV amount and fine tune. There are 4 black tall trimmer pots for pulse width, pulse width CV amount, lin FM amount and log FM amount. There are 3.5mm jack sockets for v/oct input, wave-shape CV in, oscillator output, soft sync input, pulse/saw CV in and log FM in. There is a red toggle switch to select between wave-shapes in the middle of the panel on the right hand side just above the out socket.
EN129
Picture of the Dannysound EN129 oscillator module. It has a 12 HP anodized grey metal panel with blue print. It features 1 large skirted black knob for frequency at the top with an LED button to lower left and 3 small un-skirted black knobs for through zero offset, through zero linear FM CV amount and fine tune. There are 3 black tall trimmer pots for pulse width / saw symmetry, pulse width / saw symmetry CV amount and log FM amount. There are 3.5mm jack sockets for v/oct input, through zero lin FM, soft sync input, pulse/saw CV in, log FM in. Plus a row down the right hand side of the panel of 5 output sockets for sine, triangle, saw, pulse and square wave.
Dynamics
Picture of the Dannysound Dynamics module. It has a 12 HP anodized grey metal panel with blue print. From the top going from left to right it has 2 rows of 3 small Rogan knobs in a line for compression / expansion amount, initial level and EQ treble. The next row are attack, release and EQ middle. There is another 2 rows again with 2 smaller pots for sub bass and amplifier drive and a Rogan knob for EQ bass. The last row is for input gain, mix and and Rogan knob for exciter amount. All knobs are black apart from the EQ section and exciter which form a column down the right side which are white with filled blue print background making a nice contrast. There are 3 pushbutton switches for sub bass boost, bypass and exciter bandwidth. There are 7 sockets on the bottom for envelope in, envelope out, EQ in, input, sidechain in, compressor / expander out and EQ out.
VU Meters
Picture of the Dannysound VU Meters module. It has a 8 HP anodized grey metal panel with blue print. It features 2 round analogue VU meters one above the other in the middle of the panel. Above and below each meter are an external input socket, 3 position toggle switch for selecting VU meter input and 3 position toggle switch for meter sensitivity. The switches at the top are for left / channel 1 and have white switch caps, the switches at the bottom are for right / channel 2 and have red switch caps.
Timbre
Picture of the Dannysound Timbre module which has the same layout as the MML Filter module. It has a 6 HP anodized grey metal panel with blue print. From the top going from left to right it has a trimmer pot for oscillator 1 / oscillator 2 mix and an output socket. Underneath are 2 sockets for oscillator 1 input and oscillator 2 input. Below that is a skirted black Rogan knob for timbre wave-fold amount in the centre with an un-skirted knob to lower left for CV amount and a socket to lower right for CV input. Under that are 2 controls for Symmetry and blend amount with LED indicators and jack socket inputs.
MML Filter
Picture of the Dannysound MML Filter module which has the same layout as the Timbre module. It has a 6 HP anodized grey metal panel with blue print. From the top going from left to right it has a trimmer pot for audio input level and an output socket. Underneath are 2 sockets for audio input and resonance CV input. Below that is a skirted black Rogan knob for frequency in the centre with an un-skirted knob to lower left for resonance amount and a push switch to lower right, with 3 LEDs above for low, band or high pass. Under that are 2 controls for CV 1 and CV 2 amount with LED indicators and jack socket inputs.
Looping VC-ADSR
Picture of the Dannysound Looping VC-ADSR module. It has a 6 HP anodized grey metal panel with blue print. At the top is an LED with a red toggle switch to the right. Underneath are 2 rows, the first row are black Rogan knobs for attack, decay, sustain, release and level. the second row are jack sockets for attach cv, decay cv, sustain cv, release cv, level cv, gate in and envelope output.
MM VCA
Picture of the Dannysound MM VCA module. It has a 6 HP anodized grey metal panel with blue print. From the top going from left to right it has a trimmer pot for CV 1 offset and an output socket. Underneath are 2 sockets for audio inputs. Below that in a vertical line are 2 un-skirted black Rogan knob for audio input level. Under that are 2 controls for CV 1 pre-amp and CV 2 main amp amount with LED indicators and jack socket inputs.
Imprint
Copyright © 2021 Hi-Lo-Fi Synthesizers